Easy Peanut Brittle Recipe (2024)

Published on | Updated on by Melissa

This post may contain affiliate links meaning if you buy from them, I will make a few pennies, at no cost to you. See disclosurehere.

This easy peanut brittle recipe is golden, buttery, and perfect as a treat or to package up for holiday gifts. This homemade candy is salty and sweet and only has six ingredients!

Easy Peanut Brittle Recipe (1)

How to make Peanut Brittle

Homemade candy is a favorite during the holiday season – hard candy, crockpot peanut clusters, peanut butter fudge, and this old fashioned peanut brittle recipe.

I loved Planters Peanut Bars when I was little but I don’t think they make them anymore. This peanut brittle is similar and so easy to make yourself!

You do need to use a candy thermometer but don’t let that intimidate you. You’ll be fine as long as you don’t get distracted (speaking from experience).

Easy Peanut Brittle Recipe (2)

Why you’ll love this Easy Homemade Peanut Brittle

Easy Recipe – Candy making doesn’t have to be intimidating, this one is a breeze! Even if this is your first time making candy, you’ll be fine.

Simple Ingredients – You only need a handful of ingredients, six to be exact, that you likely already have on hand.

Family Favorite – This candy recipe is great any time of year but makes a great holiday gift if you bag it up into treat bags to pass out.

Equipment you’ll need

  • Baking Sheet – Use a lipped baking sheet to keep the peanut brittle on the pan.
  • Candy Thermometer – Nothing fancy, you just need a basic one, but it is helpful to have a clip to hook to the pot.
  • Silicone Spatulas – I use these for everything in the kitchen.

Ingredients

Below is a list of the ingredients you’ll need to gather to make this recipe.Scroll all the way down for the full recipe card.

  • SUGAR – Granulated white sugar.
  • CORN SYRUP – Use light corn syrup. I use Karo syrup.
  • WATER
  • BUTTER – Unsalted butter, cubed.
  • BAKING SODA – The baking soda creates a chemical reaction causing little air bubbles to form. The candy becomes porous and brittle, making it easy to break into pieces.
  • PEANUTS – I like to use roasted peanuts for flavor but raw spanish peanuts were traditionally used.
Easy Peanut Brittle Recipe (3)

How to make peanut brittle

This brittle candy is so easy to make, but it does require you to watch the temperature so don’t get distracted!

  1. STEP ONE: Grab a large cookie sheet with sides (like a jelly roll pan) and cover it with foil. Spray with nonstick cooking spray and set aside.
  2. STEP TWO: Stir together the sugar, corn syrup, and water in a medium saucepan. Bring the mixture to a boil and continue to boil until the temperature reaches 340 degrees F. It should be golden brown after about 15 minutes.
  3. STEP THREE: Remove the pan from the heat and add butter and baking soda. It will bubble up (that’s the chemical reaction) so work quickly stirring with a silicone spatula until smooth.
  4. STEP FOUR: Pour in the peanuts and stir to evenly distribute. Quickly pour the peanut brittle mixture onto the lined baking pan and spread it evenly into a thin layer.
  5. STEP FIVE: Let the candy harden, at room temperature (about 30 minutes), and then break into pieces and store in an airtight container.
Easy Peanut Brittle Recipe (4)

Which types of nuts should I use?

Peanuts are the classic choice to use in nut brittle. Roasted peanuts have great flavor. Raw Spanish peanuts were traditionally used but either work. You could also use almonds, cashews, macadamia nuts, pecans…just about any will work.

What does baking soda do to peanut brittle?

Baking soda might seem like an odd addition to the peanut brittle and not everyone adds it, but baking soda creates a chemical reaction that creates little air bubbles. It is added once the sugar mixture has cooked down and becomes acidic. The candy becomes porous and brittle, making it easy to break into smaller pieces.

Easy Peanut Brittle Recipe (6)

Why is my peanut brittle chewy?

There is where the candy thermometer becomes important. The biggest reason your peanut brittle is chewy and sticky is because you didn’t cook it long enough. It’s not something you can guess at, you need it to reach the hard crack stage. that means the strands of sugar break easily and feel dry, as opposed to sticky.

If you take it off the heat too soon, it doesn’t set up and makes a sticky mess, but let it cook too long and it becomes scorched and bitter.

Another possible cause might be humidity in the air.You should store finished peanut brittle in an airtight container so humidity doesn’t get to it.

Easy Peanut Brittle Recipe (7)

How long is it good for?

When stored in an airtight container, at room temperature, peanut brittle will keep for 6-8 weeks. Do not put it in the fridge as it as the moisture will cause the brittle to soften.

Itcan also be frozen and stored up to 3 months.

Need more homemade candy recipes? Try these:

Christmas Oreo Bon Bons
Grinch Christmas Cream Cheese MintsCrockpot Salted Caramel Fudge
Peanut Butter Balls
Crockpot Cinnamon Sugar Candied Almonds
Christmas “Crack”
Candied Pecans
Crockpot Candy

Click here to view my entire collection of candy recipes.

Easy Peanut Brittle Recipe (8)

Connect with Persnickety Plates!

Follow along on my social media so you never miss a post!

I made a fun group on Facebook for sharing recipes, asking questions, and talking about food. I’d love to have you! Request to join HERE.

Also, sign up to receive an email in your inbox for each new recipe:

FREE EMAIL SUBSCRIPTION & EBOOK

Easy Peanut Brittle Recipe (9)

Easy Peanut Brittle Recipe

Melissa Williams | Persnickety Plates

This easy peanut brittle recipe is golden, buttery, and perfect as a treat or to package up for holiday gifts. This homemade candy is salty and sweet and only has six ingredients!

4.77 from 17 votes

Print Recipe Pin Recipe Rate Recipe Save

Prep Time 5 minutes mins

Cook Time 20 minutes mins

Harden Time 30 minutes mins

Total Time 55 minutes mins

Course Dessert, Snack

Cuisine American

Servings 10 servings

Calories 390 kcal

Ingredients

  • 2 cups granulated sugar
  • ½ cup light corn syrup
  • ½ cup water
  • 6 Tablespoons unsalted butter cubed
  • ½ teaspoon baking soda
  • 1 ½ cups roasted peanuts

Instructions

  • Line a lipped baking sheet with foil and spray with non-stick spray. Set aside.

  • To a medium saucepan, add the sugar, corn syrup, and water. Add in the candy thermometer to the pan making sure it touches the mixture but not the bottom of the pan. Bring the mixture to a boil over medium heat and then continue to boil until the mixture is golden brown and reaches 340 degrees. This should take about 15 minutes.

  • Remove the pan from the heat and quickly stir in the butter and baking soda until smooth. Then stir in the peanuts until evenly distributed.

  • Pour the mixture onto the prepared baking sheet and spread evenly with a silicone spoon, working quickly, as it will start to set.

  • Let harden at room temperature, about 30 minutes, and then break up into pieces.

Notes

Use a candy thermometer to make sure your sugar mixture reaches 340 degrees. Hook the thermometer to the side of the pan so it touches the mixture but not the bottom of the pan.

Store in an airtight container.

Nutrition

Serving: 1gCalories: 390kcalCarbohydrates: 57gProtein: 6gFat: 18gSaturated Fat: 6gCholesterol: 18mgSodium: 170mgPotassium: 170mgFiber: 2gSugar: 53gVitamin A: 210IUCalcium: 26mgIron: 1mg

Nutritional information is an estimate and provided to you as a courtesy. You should calculate the nutritional information with the actual ingredients used in your recipe using your preferred nutrition calculator.

Tried this recipe? Tag me!Mention @melissa_pplates or tag #persnicketyplates!

Sharing of this recipe is both encouraged and appreciated. Copying/pasting and/or screenshots of full recipes to any social media is strictly prohibited. Content and photographs are copyright protected.

Originally published December 13, 2020.

This recipe first appeared on Yellow Bliss Road.

Easy Peanut Brittle Recipe (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Why put baking soda in peanut brittle? ›

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

Why is my peanut brittle not turning brown? ›

If your peanut brittle is not hardening, it's because the sugar mixture did not get hot enough to properly caramelize, cool and become hard, crisp and crunchy. If you have this issue, next time, use a thermometer to make sure the peanut brittle mixture gets to 300°F.

How do you keep peanut brittle crispy? ›

Should you refrigerate peanut brittle? Store the brittle in an airtight container at room temperature for up to 1 month to maintain the crisp. Moisture in the refrigerator would soften the brittle.

What makes brittle hard? ›

What Makes it Brittle? The sugar will be cooked to 300ºF (149ºC)—hard crack stage; which when set up would be hard like a lollipop. But peanut brittle is delicate and you can easily bite into it—how? The secret is in the baking soda.

Can you overcook peanut brittle? ›

If you overcook the brittle, it could be bitter or burnt. If you undercook it, the brittle won't properly set and the end result will be sticky.

Why is my peanut brittle hard but sticky? ›

What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle.

Why is my peanut brittle bitter? ›

I don't recommend substituting honey, molasses, or agave for the corn syrup. Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

What are interfering agents in peanut brittle? ›

Examples of interfering agents include corn syrup and cream of tartar. A key step in making brittle is heating the syrup to the proper temperature. Typically, this is the hard crack stage or 300° to 310°F. This caramelizes the sugar to an amber color.

How can you tell when peanut brittle is done without a thermometer? ›

If you do NOT have a thermometer, here's what you do. Take a very small cup of cold water and drop a bit of the mixture in. If it dissolves into the water, it's not ready. Mine took 18 minutes to reach the correct temperature, so around 15 minutes start trying the water test.

Why do you put water in peanut brittle? ›

The water is there in the first place to help prevent sugar crystals. Steam from the boiling water washes down the sides of the covered pot as the sugar cooks and takes with it, down into the boiling sugar, any crystals that form or are thrown onto the sides of the pot.

Why is my peanut brittle too thick? ›

As mentioned in “how to make peanut brittle”, it's very important to move fast after the peanuts and baking soda are mixed in. If not, the peanut brittle will turn out too thick and clumpy. Don't play the guessing game and use a candy thermometer instead. This will ensure your peanut brittle turns out perfectly golden.

Should homemade peanut brittle be refrigerated? ›

To store: Store peanut brittle (once it's completely cooled) in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To freeze: Peanut brittle can be frozen and stored up to 3 months.

What is the best pan for making peanut brittle? ›

Heavy 6 quart Dutch Oven pot. Mine is an old 1970's Club Aluminum. It's perfect! You need a heavy THICK pot so it won't scorch.

Can you pour hot peanut brittle onto parchment paper? ›

You can spread the hot brittle mixture on parchment paper or a silpat liner, but I find the silpat liner a bit safer as it doesn't move around on the sheet pan like parchment has a tendency to. I've been able to keep brittle crisp for up to two months.

Why are my peanuts not getting soft? ›

Dried peanuts will require a longer soaking time before cooking, so leave them to soak for at least 8 hours or overnight. Soaking the peanuts ensures that they will soften more easily when they are cooked, giving them their delicious texture.

Why is my peanut brittle gooey? ›

As we said, the biggest enemy to the longevity of your peanut brittle is moisture. Whether it's during the cooking, cooling, or storage process, moisture and humidity can ruin the best batch of brittle in minutes, leaving you with a soggy, sticky mess.

How long does it take for brittle to harden? ›

Don't try to spread the candy once it's on the baking sheet as it starts hardening almost immediately and spreading it doesn't work well. Let the peanut brittle cool for 30 minutes, then break it into pieces. Store it in an airtight container at room temperature for up to two months.

Is peanut brittle supposed to be hard? ›

Peanut Brittle is a smooth, flat candy (similar to toffee), with peanuts in it, that is cooked on the stovetop and poured onto a sheet pan to cool. Once it cools it's broken into small individual-size pieces of hard candy and lasts at room temperature for several weeks.

References

Top Articles
Latest Posts
Article information

Author: Clemencia Bogisich Ret

Last Updated:

Views: 5665

Rating: 5 / 5 (60 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Clemencia Bogisich Ret

Birthday: 2001-07-17

Address: Suite 794 53887 Geri Spring, West Cristentown, KY 54855

Phone: +5934435460663

Job: Central Hospitality Director

Hobby: Yoga, Electronics, Rafting, Lockpicking, Inline skating, Puzzles, scrapbook

Introduction: My name is Clemencia Bogisich Ret, I am a super, outstanding, graceful, friendly, vast, comfortable, agreeable person who loves writing and wants to share my knowledge and understanding with you.